Most versatile stapler/nailer?

This topic is empty.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
October 30, 2021 at 8:45 am #754

Christopher Rasch
Guest

I’m a DIYer who wants to make cabinetry (using 1/2″ and 3/4″ plywood), sheds, rolling carts, tool cases, and other projects that will be used in an outdoor, salt air environment (32″ of rain/year, near the ocean). Which of the nailers/staplers do you think is the most versatile?

November 1, 2021 at 8:32 am #756

Jeff Venditte
Guest

Hi,
Please see our website for more information (https://raptornails.com/) on our composite fasteners and tools. We have specific tools we recommend for specific products. We recommend going no more than 3/8″ into your substrate for maximum hold strength. For cabinetry as an example, a pin or brad would be recommended for use during the glue process (or any temporary hold process). We have a pin nailer and a brad nailer. You cannot use one gun for both products.

Thanks
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.